Oil in bearings?
3 posters
Page 1 of 1
Oil in bearings?
How much oil do any of you use in your bearings on your casting reels?
I've got my 7ht and ABU 6500 green mag elite, 1 drop of yellow rocket fuel in either bearing or run them dry on the field?
I've got my 7ht and ABU 6500 green mag elite, 1 drop of yellow rocket fuel in either bearing or run them dry on the field?
Re: Oil in bearings?
just the one drop, and only a small one at that.
Big Brad- Admin
- Number of posts : 10110
Registration date : 2010-07-25
Age : 96
Location : Corfe Mullen
Re: Oil in bearings?
Hi Rich ,if they are ceramic you could run them dry
but a small drop of yellow would be ok but only a
very small amount try dipping a offcut of shockleader in
pot 1 drip of end it helps if you remove dust shield of
one side of bearing .
but a small drop of yellow would be ok but only a
very small amount try dipping a offcut of shockleader in
pot 1 drip of end it helps if you remove dust shield of
one side of bearing .
Gill- Number of posts : 525
Registration date : 2009-08-18
Age : 52
Location : Somerset
Re: Oil in bearings?
Need to soak them in lighter fuel again!
Put in a full drop on either bearing out of the bottle.......
Put in a full drop on either bearing out of the bottle.......
Re: Oil in bearings?
thats a big drop, but you shouldnt have any problems controlling the reels
Big Brad- Admin
- Number of posts : 10110
Registration date : 2010-07-25
Age : 96
Location : Corfe Mullen
Re: Oil in bearings?
All sorted...just cleaned out the bearings and lightly oiled them.
All ready for tomorrow.
Thanks for the help.
All ready for tomorrow.
Thanks for the help.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|