first ever pendulum casting
Page 1 of 3 • Share •
Page 1 of 3 • 1, 2, 3 
first ever pendulum casting
had a casting lesson yesterday with colin and started my first bit of swinging. felt bloody wierd to start off with but managed to get it straight and didn't take out anyone left or right.
hopefully the 2 links below will work for anyone thats interested plus its a free plug for colin whom has the patience of a saint
feel free to criticise as long as its positive
cheers. jules
http://www.youtube.com/watch?v=JpF4ICMX1cA&feature=youtu.be
http://www.youtube.com/watch?v=AnHCdoVufCQ&feature=youtu.be
hopefully the 2 links below will work for anyone thats interested plus its a free plug for colin whom has the patience of a saint
feel free to criticise as long as its positive
cheers. jules
http://www.youtube.com/watch?v=JpF4ICMX1cA&feature=youtu.be
http://www.youtube.com/watch?v=AnHCdoVufCQ&feature=youtu.be

jules.barlow- Number of posts: 933
Registration date: 2011-12-05
Age: 40
Location: Yeovil Somerset
Re: first ever pendulum casting
good first go mate, just try and keep that right arm straight and not move it at all on the swing out and in, as in the vid it move up and down a bit.
Hope thats positive
Hope thats positive

formerly known as Dizzy- Number of posts: 863
Registration date: 2011-07-31
Location: Bridport
Re: first ever pendulum casting
cheers bud. its gonna take a while i think to adjust.
just got your e-mail too mate. cheers for sending it through
just got your e-mail too mate. cheers for sending it through

jules.barlow- Number of posts: 933
Registration date: 2011-12-05
Age: 40
Location: Yeovil Somerset
Re: first ever pendulum casting
It`s ok Jules, for your first attempts, but, at the end of the cast, don`t drop your rod tip to the beach. Hold your tip up at about 45 degrees until the lead splashes down. This will keep the line flowing along the rod with least resistance. It also looks good too!..

Southside Stu- Number of posts: 868
Registration date: 2011-04-28
Location: Hampshire, soon Perth!
Re: first ever pendulum casting
Not bad for a first attempt.Try looking up and stopping the rod at
the end of the cast.

the end of the cast.

Gill- Number of posts: 399
Registration date: 2009-08-18
Age: 40
Location: Somerset
Re: first ever pendulum casting
Southside Stu wrote:It`s ok Jules, for your first attempts, but, at the end of the cast, don`t drop your rod tip to the beach. Hold your tip up at about 45 degrees until the lead splashes down. This will keep the line flowing along the rod with least resistance. It also looks good too!..
cheers mate. felt really wierd to be honest stu. tons of practice mate i think.

jules.barlow- Number of posts: 933
Registration date: 2011-12-05
Age: 40
Location: Yeovil Somerset
Re: first ever pendulum casting
Gill wrote:Not bad for a first attempt.Try looking up and stopping the rod at
the end of the cast.
cheers gill. noticed that for some reason i kept trying to bust the end of the rod off on the shingle !!! so much to think about


jules.barlow- Number of posts: 933
Registration date: 2011-12-05
Age: 40
Location: Yeovil Somerset
Re: first ever pendulum casting
haven't got a bloody clue if ya doin it right mate but it looks alot better than the attempts that i have tried so keep at it pal, im sure you'll have it sussed in no time

horsey- Number of posts: 321
Registration date: 2011-11-06
Age: 27
Location: weymouth
Re: first ever pendulum casting
looks good for a beginner.

showa- Number of posts: 361
Registration date: 2010-12-28
Age: 54
Location: westhill ottery st mary.
Re: first ever pendulum casting
horsey wrote:haven't got a bloody clue if ya doin it right mate but it looks alot better than the attempts that i have tried so keep at it pal, im sure you'll have it sussed in no time

jules.barlow- Number of posts: 933
Registration date: 2011-12-05
Age: 40
Location: Yeovil Somerset
Re: first ever pendulum casting
Colin is definitely the man to sort it, improved my casting no end, although some would disagree when I go over them
Re: first ever pendulum casting
Looks good to me, very smooth action there, beats my overhead lob!

portlanders- Number of posts: 1207
Registration date: 2011-09-11
Age: 41
Location: Portland
Re: first ever pendulum casting
Hi jules
Did you get the video from side ways on? That was a better angle.
Keep up the practise and then next time we meet we can work on body rotation, rod angle, punch pull so not much left to work on!!!!!!!
Did you get the video from side ways on? That was a better angle.
Keep up the practise and then next time we meet we can work on body rotation, rod angle, punch pull so not much left to work on!!!!!!!
Re: first ever pendulum casting
crack off colin wrote:Hi jules
Did you get the video from side ways on? That was a better angle.
Keep up the practise and then next time we meet we can work on body rotation, rod angle, punch pull so not much left to work on!!!!!!!
pmsl. only got 2 videos colin so dont think so mate. going out tuesday for some practice practice practice

jules.barlow- Number of posts: 933
Registration date: 2011-12-05
Age: 40
Location: Yeovil Somerset
Page 1 of 3 • 1, 2, 3 
Similar topics» pendulum casting
» first ever pendulum casting
» Lets get you casting part 1 (with the off the ground & pendulum cast)
» Casting day 27th March
» pendulum casting
» first ever pendulum casting
» Lets get you casting part 1 (with the off the ground & pendulum cast)
» Casting day 27th March
» pendulum casting
Page 1 of 3
Permissions in this forum:
You cannot reply to topics in this forum














